RavanH

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 401 total)
  • Author
    Posts
  • October 9, 2023 at 11:26 pm #41824

    Hi Julian, it’s a very weird effect that I have not seen before. Hard to debug because with the browser Dev Toolbar it starts to behave differently. I’ve not been able to figure out what causes this 🙁

    Could you try another script version on Settings > Media? Maybe fancyBox2 version that has a slightly different way of calculating space, will behave correctly here.

    I also wonder if it is because of the fact that you use the class “fancybox” instead of the required class “fancybox-vimeo” or no class and letting the autodetect do its work… That is, if you followed instructions on https://efbpro.firelightwp.com/knowledge-base/easy-fancybox/slider-revolution-5/

    But the API code snippet seems different, so maybe I should ask: which instructions did you follow? 🙂

    October 5, 2023 at 11:15 am #41785

    Hi Julian, the dedicated Vimeo embed is designed to keep it’s aspect ratio when resized. Apparently this is not working in your case.

    Could you share a link to your site where I can see it live? It may be a conflict with other scripts on that page…

    May 26, 2023 at 9:51 pm #40896

    Hi George, good to hear that! If you could find the time to share the solution (even if it’s an obvious one) it could help others that encounter the same issue. Much appreciated 🙂

    December 20, 2022 at 5:29 pm #38788

    Hi Carrington, have you set the the Browser & device compatibility options (height and/or width) under “Miscellaneous” on Settings > Media?

    December 14, 2022 at 2:33 pm #38727

    Hi Carrington, our apologies for the inconvenience. Somehow the form submissions were filtered out as spam. Good thing: your last message did come through. Thank you for insisting and trying again!

    We’ll have to rethink our spam filters, currently being applied to all forms, not just the public ones…

    December 14, 2022 at 1:12 pm #38720

    Update: I’ve been able to reproduce the issue and it looks like you found a bug.

    While we’ll work on fixing it, could you switch to either the Legacy or the fancyBox2 script version on Settings > Media? It’s the first option in the Fancybox section.

    The Legacy version will give you the script as it was in previous versions, while fancyBox2 is a more modern version with touch support but that’s not relevant in case of iframes…

    December 14, 2022 at 12:58 pm #38718

    Hi Carrington, my apologies for the late reply. I’ve checked your page and see what you mean. I’ll try to reproduce this and will let you know asap.

    June 14, 2022 at 8:10 am #36654

    That looks good (even without the !important) just add an overflow:hidden; 🙂

    June 13, 2022 at 9:47 pm #36646

    In that case, try:

    
    .fancybox-title-over {
      top: 0;
      bottom: initial !important;
    }
    
    June 13, 2022 at 3:11 pm #36639

    Hi Chris,

    Moving the title to the top depends on which Title option you are using. If set to the (default) option “Float”, then you can try with the following CSS. Adjust the value -15px if it does not vertically align with your close button (depends on several factors).

    
    .fancybox-title-float {
        top: -15px;
        bottom: initial;
    }
    

    To keep the arrows visible you can use the following CSS which will do two things: make the arrows permanent and move them to the outer border like the close button (so they do not permanently cover the lightbox content.

    
    #fancybox-left,#fancybox-right {
        width: 0;
    }
    #fancybox-right span {
        left: auto;
        right: -15px !important;
    }
    #fancybox-left span {
        left: -15px !important;
    }
    
    April 2, 2021 at 2:41 pm #31563

    Hi, sorry that is not supposed to happen… I’ll have to check what is going wrong with posting code on the forum.

    In the mean time, please send your files to support@status301.net

    April 1, 2021 at 9:15 pm #31548

    Hi Bob, yes you can initiate a light box with iframe content from a link or button.

    1. First, activate the iFrame option on Settings > Media. Once activated you may modify preferred light box sizes if you need to.

    2. Then go to edit the page, post or the sidebar where you wish to create your link or button.

    3. Insert an HTML block or widget and paste the following code:

    
    <a href="#" class="fancybox-iframe button">LINK TEXT</a>
    

    4. Replace the # in the href attribute with the URL that you would use in a normal iframe embed (the src attribute) and the LINK TEXT with whatever text you want to appear.

    Save your post/page/widget and test 🙂

    Note that the class “button” was added in the hope that it is a class that is defined in your theme stylesheet. If it’s not, you can open your theme Customizer and define it yourself in Custom CSS. See button example.

    March 14, 2021 at 12:24 pm #31305

    Good to hear that worked!

    There is a button “Donate to this plugin” on the right side of the free version plugin page https://wordpress.org/plugins/xml-sitemap-feed/ … Thanks 🙂

    March 12, 2021 at 7:52 am #31287

    The PUM div has z-index: 1999999999 so if you give the FancyBox z-index one more extra digit (like a 9) it should start working 🙂

    March 11, 2021 at 10:49 am #31279

    Hi Bob, you could try changing the Z-index for the Easy FancyBox light box to a higher level. I’m not sure how high it needs to be to show before the Popup Maker light box but try adding this in the Additional CSS field in your theme Customizer:

    
    #fancybox-wrap {
        z-index: 1111101;
    }
    
Viewing 15 posts - 1 through 15 (of 401 total)